Engineered Protection. Professionally Installed.
We offer two professional-grade ceramic coating systems designed for different levels of longevity and performance:
-
Borograph 3.0
-
Borophene 4.0
Both are installed using a meticulous preparation process to ensure maximum bonding and durability.
preparation determines performance
Every ceramic coating installation includes professional paint correction prior to application. The level of correction performed depends on your vehicle’s current paint condition. This may range from a Stage 1 enhancement polish on newer vehicles to more intensive multi-stage correction for heavily defected finishes. Our condition-based refinement process ensures:
✔ Proper coating adhesion
✔ Enhanced gloss and clarity
✔ Improved surface uniformity
✔ Long-term performance and durability
Final correction level is determined during your in-person inspection. Ceramic coatings enhance and protect — they do not hide imperfections. Proper preparation is essential.
our ceramic coating options
Borophene 4.0 Ceramic Coating
With a molecular-level bond and superior hydrophobic properties, Borophene 4.0 coatings offer enhanced durability, higher gloss and long-lasting protection that repels water, contaminants and UV damage more effectively than standard ceramic coatings.
Benefits:
-
Delivers up to a 40% higher gloss index compared to a traditional ceramic coatings
-
Boasts a long lasting high gloss finish and protection up to 10 years with minimal maintenance
-
Has a water contact angle of 180 degrees, providing exceptional hydrophobicity
-
Warranty Backed
Starting at $1599
Borograph 3.0 Ceramic Coating
Borograph 3.0 is an advanced ceramic coating enhanced with graphene oxide and boron-based technology, delivering ultra-high gloss and exceptional surface protection with nano diamond suspension that boosts shine and durability far beyond traditional coatings.
Benefits:
-
High-Temperature Performance maintaining protective qualities under elevated temperatures
-
Has a water contact angle of 185 degrees providing superior hydrophobicity
-
102+ Gloss Index readings providing unparalleled show room finishes
-
Permanent Protection providing indefinite gloss and protection with minimal maintenance
-
Warranty Backed
Starting at $1899
PROTECTION AGAINST
Tree Sap
Acid Rain
Weather
Chemicals
UV Rays
Bird Droppings
Our Ceramic Coating Installation Process
At Gloss Masters Michigan, we take pride in delivering meticulous and comprehensive ceramic coating services. Ceramic coatings are only as good as the preparation underneath them. Skipping steps results in poor bonding, uneven appearance, and reduced durability. Our process ensures your vehicle receives the level of preparation required for long-term performance.
step 1 : deep decontamination wash
We begin with a thorough wash using professional-grade products to safely remove dirt and road grime, traffic film, brake dust, and surface contaminants. This prepares the surface for deeper decontamination.
step 2 : iron removal & chemical decontamination
Even clean vehicles contain embedded iron particles and industrial fallout. We perform a chemical decontamination process to dissolve embedded contaminants that cannot be removed through washing alone. This step ensures the paint surface is fully purified before correction.
step 3 : Paint inspection & defect evaluation
Under professional LED lighting, we inspect the vehicle’s paint condition.
We evaluate:
-
Swirl marks
-
Scratches
-
Oxidation
-
Previous improper polishing
-
Overall paint clarity
This determines the level of paint correction required prior to coating.
step 4 : condition based paint correction
Every ceramic coating installation includes professional paint correction.
The level of refinement is determined by the vehicle’s condition and may range from a light enhancement polish to a more intensive multi-stage correction.
This step:
✔ Refines the paint surface
✔ Enhances gloss and clarity
✔ Ensures proper coating adhesion
✔ Removes defects safely and professionally
Proper preparation is critical. A coating bonds to the condition of the paint — imperfections left behind will be sealed beneath it.
step 5 : Surface preparation
After correction, the vehicle undergoes a final surface preparation process to remove polishing oils and residue. This ensures a completely clean surface for optimal ceramic bonding.
step 6 : ceramic coating application
The selected ceramic coating system (Borograph 3.0 or Borophene 4.0) is carefully applied in controlled sections.
Each panel is leveled and inspected to ensure:
-
Even coverage
-
Proper bonding
-
Uniform finish
Application is performed in a controlled environment to minimize contamination.
step 7 : final inspection & quality control
After application:
-
The coating is allowed to cure properly
-
Each panel is inspected under professional lighting
-
The vehicle is reviewed to ensure consistent finish quality
We only release a vehicle once it meets our standards. Following the ceramic coating process, your vehicle also receives a light interior refresh, including thorough vacuuming, interior glass cleaning, and a careful degreasing wipe-down to leave every surface spotless and polished.
Our promise
At Gloss Masters Michigan, we don’t apply coatings — we deliver complete surface refinement and long-term protection. Every ceramic coating installation includes professional paint correction and meticulous surface preparation to ensure your vehicle receives the level of care required for maximum gloss, durability, and performance.
We promise:
✔ A properly refined surface before protection
✔ Professional-grade ceramic technology installed with precision
✔ Long-term defense against environmental contaminants, UV exposure, and chemical staining
✔ Extreme hydrophobic performance for easier maintenance
✔ A deep, high-gloss finish that enhances the natural depth of your paint
We do not cut corners.
We do not apply coatings over unprepared surfaces.
We do not compromise the installation process.
Whether protecting a brand-new vehicle or restoring clarity to a previously neglected finish, our ceramic coating systems are installed to perform — not just to look good on day one.
Your vehicle leaves our facility with a finish that is refined, protected, and professionally installed to withstand Michigan’s demanding conditions.
Frequently asked questions
How to Choose the Right Ceramic Coating Installer
Choosing the right ceramic coating installer is critical to achieving long-term results. Not all coatings — or installers — are the same. Here’s what every vehicle owner should consider before making a decision.
✔ Certification Matters
Look for installers certified by reputable ceramic coating manufacturers or professional training programs. Certification ensures proper training and proper application procedures.
Ask whether the service is reported to CARFAX.
✔ Research the Installer
• Check online reviews and testimonials
• Ask for references
• Visit the facility to assess cleanliness and professionalism
A reputable shop should operate in a clean, controlled environment.
✔ Avoid Door-to-Door or Pop-Up Tent Services
Ceramic coating requires proper surface preparation and a controlled environment for correct bonding and curing. Be cautious of temporary setups or unsolicited offers.
✔ Transparency & Communication
A professional installer should clearly explain:
• The preparation and paint correction process
• Application method
• Curing time
• Aftercare instructions
If they cannot confidently answer questions, that’s a red flag.
✔ Quality Products Matter
Ask about the coating brand being used. High-quality coatings from reputable manufacturers deliver better durability and protection. Extremely low pricing may indicate shortcuts or inferior products.
✔ Warranty & Guarantees
A reputable installer stands behind their work. Always ask:
• What does the warranty cover?
• How long does it last?
• Are there maintenance requirements?
A certified and experienced installer ensures proper application and maximizes the benefits of your investment.
Ceramic coating is an investment in your vehicle. Proper preparation, professional installation, and high-quality products make the difference between long-term protection and short-term disappointment.